• Fits most oil stick openings of 1/4" or more.

• Stainless steel tubing is flexible making it possible to be installed in most engines.  This flexible feature allows greater coverage.

• Economical to operate.

• Heats oil and air in crankcase.

• For Cars, Truck, Tractors

To see installation instructions click on image

• Use as Engine Oil Heater

• Use as Transmission oil Heater

• Easy to install!

• Includes instructions and display box.

• One year Warrantee by Five Star Manufacturing Company

Instructions for operating and installing

1. Measure dipstick to see that 4 inches is in the oil. At least 4 inches of the Kat's dip stick must be in the oil.

2. Replace oil stick with Kat's Oil Heater.  This semi-flexible oil heater will conform with most curves in the oil stick tubes.

3. Connect oil heater into any 120 volt outlet and operate on an all-night basis. It is important to begin operating oil heater when car engine is still warm.  Check heater clearance from hood, before closing hood.  Be sure no wires or cables come in contact with heater.

4. Remove the oil heater before starting your engine.  After each use, wipe oil heater clean of oil  or sludge.  This will greatly prolong the life of your oil heater.

CAUTION: 

1. Do not use on oil stick openings that have plastic parts.

2. Oil Heater must be immersed 4" in oil for operation.