Kat's 10435 Frost Plug Engine Block Heater

400 Watts 120 Volt. Fits 42.5 mm  (1 23/32") Frost Plug hole

Retail Price: $36.67

Our Price: $24.99

Free shipping

Click Image for Larger View.

The High Performance ENGINE HEATER. 

• It keeps your engine liquids from freezing.

• The electrical cords are permanently attached for best electrical connection

• Threaded 42.5 mm block heater Hole Diameter

• It has 400 watts of power using 120 Volts

• It has a 60 inch 3 wire ground electrical cord with standard three prong plug.

Kat's 10435

Includes instructions.

WARNING:  Do not test out of water.

Click on page above for Description & Instructions for Installation of Frost Plugs & Frost Plug types

Auto Applications:

 5 MOST COMMON FAILURE CAUSES FROM INSTALLATION OR OPERATOR ERRORS

1. Pre-heater plugged in while engine is running.

2. Air not bled from system (run engine until maximum system pressure is reached before plugging it in).

3. Plugged in before it is installed to see if it gets hot (trust us; IT WILL!)

Do not use a Kat's engine heater when using a 100% solution of antifreeze.

• These heaters are equipped with a three prong (grounding) plug and should be connected to a properly grounded circuit.

• If an extension cord is used in conjunction with this heater, be certain that the wire size of the extension cord is of adequate size for the wattage of the heater and distance from the receptacle to the heater.  Consult a licensed electrician if further information is required.

• Do not start engine with heater plugged in.  Element hot spots could occur causing the element to burn out.

Click on Logo above for PDF of Kat's Warrantee. Please Read if purchasing.

GUARANTEE: KAT'S HEATERS ARE GUARANTEED FOR ONE YEAR FROM DATE OF PURCHASE AGAINST FACTORY WORKMANSHIP OR MATERIALS. Manufactured by Five Star Mfg. Co.. Tel: 1-888-872-7278

Five Star Manufacturing Company