To obtain satisfactory results from
your engine heater, please read the following information carefully:
DO NOT USE A KAT’S ENGINE HEATER WHEN USING A 100%
SOLUTION OF ANTIFREEZE.
These heaters are equipped with a
three prong (grounding) plug and should be connected to a properly grounded
circuit.
If an extension cord is used in
conjunction with this heater, be certain that the wire size of the extension
cord is of adequate size for the wattage of the heater and distance from the
receptacle to the heater. Consult a licensed electrician if further
information is required.
Do not start engine with heater plugged in.
Element hot spots could occur causing the element to burn out.
PLEASE NOTE: Any item
below marked with an asterisk (*), is a non-stocked item. Expect 3 to 4
weeks delivery time. Faster service direct from the factory is available for a
$25 drop ship charge.